ITEAS | MIC-10 Insulation Resistance Tester

Power supply: 4 AA disposable or rechargeable batteries, monitoring of power supply voltage

Electrical Safety:

type of insulation double, in acc. with EN 61010-1 and IEC 61557

measurement category in acc. to IV 600 V (III 1000 V) EN 61010-1

case protection rating in acc. with EN 60529 Ip67

Other technical specifications:

power supply of the meter.............................4 alkaline batteries or battery package Ni-MH

weight of the meter................................................................................................... ~0,6 kg

dimensions..............................................................................................220 x 100 x 60 mm

humidity ...............................................................................................................20%...90%

*For full Technical Specifications, please refer to PDF Data Sheet

- selected test voltage: 50, 100, 250, 500, 1000V (MIC-10)

or any voltage in the 50...1000V range with 10V step (MIC-30),

- automatic measurement in sockets with the UNI-Schuko adapter

(MIC-30) with possibility of configuring pairs of measured cables,

- continuous indication of insulation resistance or leakage current,

- automatic discharge of capacitance of tested object after the

insulation resistance measurement,

- acoustic signalling of five-second periods to facilitate obtaining time

characteristics,

- measured test times T1, T2 i T3 to measure one or two absorption

coefficients in the 1... 600 sec. range (only MIC-30),

- indication of actual test voltage during the measurement,

- protection against measuring live objects,

- three-lead measurement.

Continuity measurement of protective and equipotential conductors according to EN 61557-4 with the >200mA current

Low-voltage circuit continuity and resistance measurement:

- circuit resistance measurement (<1999 ) with the <15mA current,

- quick sound signal if circuit resistance is below 30