top of page
Partial Discharge Testing
  Multi-meters & Clamp-meters  

The MD 9070 Insulation / Continuity

is a high accuracy insulation and continuity multimeter which may be used in a CAT IV / 600 V environment. It's dual digital display provides all needed data to the operator. The instrument is equipped with a built-in VFD feature. Measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset,

MD 9070.jpg

The MD 9060 TRMS, 500.000 counts LCD, 100 kHz Voltage Bandwidth Heavy Duty Industrial Multimeter

ranks among the most accurate multimeters with a large bandwidth & very high resolution. Capable of measuring the true values in accordance with frequency, large 2-line 500.000 counts LCD display, fast data acquisition and transfer (via optical interface), CAT IV / 1000 V, TRMS current and voltage measurement, conductance measurement 

MD 9060.jpg

The MD 9050 TRMS Heavy Duty Industrial

ranks among the best multimeters on the market. High resolution and accuracy, 2-line LCD display, fast data acquisition and transfer (via optical interface), CAT IV / 1000 V, TRMS current and voltage measurement, non-contact  voltage detection,
conductance measurement, auto check function and fast one-handed operation are highlights of the multimeter.

MD 9050.jpg

The MD 9040 TRMS Industrial

CAT IV / 1000 V overvoltage category and TRMS measurement of AC current and voltage are key features of the MD 9040. Particularly suitable for performing measurements on power supply sources in the most demanding applications in the industrial sector. Its high accuracy, 2-line LCD display, diverse measurement functions, fast one-handed operation and outstanding value for money open up a wide range of possible uses.

MD 9040.jpg
MD 9016.jpg

The MD 9016 Electrical Field Service Multimeter

is a perfect combination of size, innovative functions and built-in PC communication. It is capable to detect and diagnose most electrical and electrotechnical problems. This compact instrument combines a high level of functionality and small size and portability.

MD 9030.jpg

The MD 9030 TRMS

digital multimeter has been designed for use both in the laboratories and in the harsh industrial maintenance
and repair sector. TRMS functionality makes the multimeter suitable for a multitude of situations, while the large
bright screen with backlight and incorrect lead connection alert make it ideal for working in dark areas.

MD 9020.jpg

The MD 9020

is a high-quality digital multimeter, designed for everyday use in the laboratory and for maintenance and
repair work in the field and in the industrial sector as well. AC, DC voltage measurement. and AC, DC current measurement.

MD 9010.jpg

The MD 9010 Autocheck 

is one of the smallest and lightest of our digital multimeters. The MD 9010 unit can be used for a wide variety of applications. The high accuracy, LCD display and features including non-contact voltage detection and an autocheck function make the multimeter extremely versatile and great value for money.

MD 9221.jpg

The MD 9221 

is a professional TRMS AC current clamp meter capable of measuring temperature with a Type K probe, capacitance and frequency. built-in VFD feature that enables the instrument to measure true values in accordance with frequency. MAX hold functions, peak value, auto power off, auto-ranging, relative zero and a 3-phase rotation function.

MD 9222.jpg

The MD 9222 

is a professional TRMS AC current clamp meter with a wide jaw opening and is capable of measuring currents up to 1000 A. It has the ability to measure capacitance and frequency and is equipped with a built-in VFD feature. MAX hold functions, auto power off, auto-ranging and a relative zero function.

MD 9225.jpg

The MD 9225

is a versatile current clamp meter with perfect combination of size and built-in functions. It measures AC/DC current and voltage, capacitance, temperature, full range resistance and captures In-rush current. Display with large easy-to-read figures and one-handed operation make MD 9225 an extremely easy-to- use. A perfect tool for advanced applications.

MD 9226.jpg

The MD 9226

is a professional DC and TRMS AC current clamp meter capable of measuring capacitance and frequency. It is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency. MAX hold functions, auto power off, auto-ranging and a relative zero function.

MD 9231.jpg

The MD 9231 

is an industrial TRMS AC and DC current clamp meter with a wide jaw opening and is capable of measuring currents up to 1000 A. Built-in VFD feature. Peak value, data and MAX hold functions, auto power off, auto-ranging and a relative zero function.It also has a flashlight for work in dark conditions.

MD 9235.jpg

The MD 9235 

is a Slim-Jaw current clamp meter with ability to measure 3-Phase
Unbalanced-Load + kWHr recording. Enables TRMS AC current
measurement up to 600 A, single and 3-phase power analysis, total power factor and resistance measurement. A perfect tool for advanced Power applications.

MD 9250.jpg

The MD 9250

is the first Clamp Meter that meets overvoltage category CAT IV 1000 V. Single-hand operation, built-in measuring functions; TRMS AC/DC (current, voltage), capacitance, temperature and full range resistance makes this instrument an ideal tool for the most demanding applications in the industrial sector.

MD 9272.jpg

The MD 9272 

It can accurately read the TRMS AC leakage current of a system & also detect losses in the system and suggest possible reasons for the loss. The voltage (AC/DC), frequency, power, harmonic, power factor (PF), total harmonic distortion (THD) and crest factor measurements make this instrument suitable for any electrician and engineer.

MD 9240.jpg

The MD 9240

is a high-quality and extremely easy to handle power clamp meter. The current clamp enables TRMS AC
current measurement up to 1000 A, single-phase power analysis, DC, AC voltage measurement, temperature measurement. For maintenance and checking of distribution systems, switchboards and motors, or in systems where the supply network is heavily contaminated with harmonics.

MD 9210.jpg

The MD 9210 

is a current clamp that has versatility, sturdy case, high accuracy and lots of measurement functions are key features of the current clamp MD 9210. If you’re looking for a universal current clamp offering good value for money, look no further!

MD 9230.jpg

The MD 9230 

is a universal current clamp for measuring DC and TRMS AC voltages up to 600 V and DC and TRMS AC currents up to 1000A. With a broad spectrum of measurement functions and features, it is an ideal tool for service companies and works electricians in the industrial sector.

CMM-10 Multimeter.jpg

The CMM-10

has been designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, temperature and also for testing diodes and continuity. 

Autoranging/manual range selection.

CMM-40 Industrial  Multimeter.jpg

The CMM-40

Industrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.

CMP-200.jpg

The CMP-200 

digital clamp meter has been designed for clamp measurements of AC leakage current. display LCD 3 digits (max 1999),  white LED backlight internal diameter clamp approx. 30mm (1,2”),

CMP-400 - CMP-401.jpg

The CMP-400 & CMP-401

Safe, insulated measuring clamps,

Double moulded housing, autoranging /manual range selection, „DATA HOLD” function, for holding measured values, Backlit LCD, „REL” function, Over range indication, AUTO-OFF” function.

CMP-1006.jpg

The CMP-1006 

Safe, insulated measuring clamps,

Autoranging /manual range selection, „DATA HOLD” function, for holding measured values, „DC ZERO” mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored „zero” value,

CMP-2000.jpg

The CMP-2000

Safe, insulated measuring clamps,

Autoranging / manual range selection, „DATA HOLD” function, for holding measured values, „DC ZERO” mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored „zero” value,

ITE GLOBAL - logo (square).jpg

..

ITE GLOBAL - logo (square).jpg

..

ITE GLOBAL - logo (square).jpg

..

bottom of page