top of page
MI 3109 EurotestPV Lite
MI 3109 Eurotest PV Lite.jpg
Key Features:

​The MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests requiredon photovoltaic installations.  This includes all of the tests as required by EN62446, but also
includes I - U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV
tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with
pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.

• Autotest

• Calculation to STC values;

• Efficiency calculations;

• Graphical representation of module’s I - U curve;

• 2 voltage & 2 current channels for simultaneous AC & DC

  parameters measurements;

• Optional PV Remote Unit for simultaneous measurements of

  solar irradiation and temperature of PV module;

• BT communication with PC, Android tablets and smart phones

  via BT dongle;

• PV Android APP, data management tool (option).


Photovoltaic installations:

Measurements on DC side of PV installation:
• Voltage, current, power;
• Insulation and continuity;
• Uoc (Open Circuit Voltage) and Isc (Short Circuit

• I - U curve of PV modules and strings;
• Irradiance;
• Module temperature.

Measurements on AC side of PV installation:
• Voltage, current, power;
• Efficiency of PV module, inverter, PV system

• Optional 3-phase efficiency measurements.


• Testing, evaluations and troubleshooting of photovoltaic

• Power efficiency measurements (AC and DC).


• Large internal memory: ca 1800 measurements or ca. 500 measurements of I-V curve or Power (Scope) or adequate combination.
• Built-in help screens with connection diagrams for each function.
• Tester has a built-in charging circuit and comes complete with a set of rechargeble NiMH batteries.
• PC SW Eurolink PRO included in the standard set enables downloading of test results and parameters and creation
of test reports.Insulation resistance;
• Continuity of PE conductors;
• Line impedance;
• Loop impedance (sub-functions with high current and without

  RCD tripping);
• RCD testing (type AC, A and B);
• Earth resistance;
• AC current (load and leakage);
• TRMS voltage, frequency, phase sequence;
• Power, energy, harmonics.

Technical Specifications & Accessories:

* Print or Download document by clicking on the relative icon. 

bottom of page