MD1000R
Introduction to the MD1000R:
-
The TENTECH MD1000R is a smart, microprocessor controlled, 1 kV insulation tester for up to 200 GΩ resistance measuring with 250 V, 500 V and 1000 V test voltage. It is a portable, hand-held, battery powered equipment. Due to its measurement principle (actual voltage and current readings) it is a "true megohmmeter" and so the accuracy of resistance measurement is not affected by any test voltage error.
-
Operation is very simple and user-friendly: just connect the leads, switch-on the equipment, select the test voltage and press the Test button. Then the equipment automatically selects the most suitable range and shows the measured value in the 3½ digits display.
-
In order to guarantee the operator safety there are no accessible metallic parts. Output terminals are placed in the furthest and most protected area of the equipment. A light indicator shows high-voltage presence and is switched-off when the capacities (both internal and external) are discharged up to reaching a safe value.
-
Furthermore, it offers useful additional features: 200 mA continuity range, low resistance measurement, AC/DC voltage measurement up to 600 V, selectable timer, hold memory, and selectable resistance limits for pass-fail testing, with acoustic indication.
-
Surface leakage paths may affect the measurement of high value insulation resistance. The use of the GUARD terminal permits to remove the effect of this current, substantially improving the test result.
-
Due to its reduced dimensions and weight, power supply autonomy and mechanical resistance, this equipment is suitable for fieldwork.
The MD1000R
Technical Specifications
Nominal test voltages
-
250 V - 500 V - 1000 V
-
Negative, DC voltage
Resistance measurement range
-
From 10 kΩ up to 200 GΩ
Short circuit current
-
1.5 ± 0.3 mA
Test voltage accuracy
-
-0 / +15 % for resistances between 10 MΩ and open circuit
Basic accuracy
-
R ≤ 50 GΩ: ± 5 % of reading ± 2 digits
-
R > 50 GΩ: ± 10 % of reading ± 2 digits
Low resistance measurement and continuity tester
-
Range: 0.05 Ω to 150 Ω
-
Accuracy: ± 5 % of reading ± 2 digits
-
Test current: up to 200 mA
-
Continuity indicator: Activates at R < 5 Ω ± 0.5 Ω
Built-in timer
-
5 - 10 - 15 - 30 seconds
-
1 - 2 - 3 - 5 - 10 - 15 minutes
Pass / fail test
-
1 - 2 - 5 - 10 - 20 - 50 - 100 - 200 - 500 MΩ
-
1 - 2 - 5 - 10 - 20 - 50 - 100 GΩ
Voltmeter True RMS.
-
Range: 0 - 600 VAC/DC
-
Accuracy: ± 3 % of reading ± 2 digits
Additional features
-
Automatic polarization index
-
Guard terminal
-
Hold function
Overvoltage protection
-
600 V
Safety class
-
In accordance with IEC 61010-1
E.M.C.
-
In accordance with IEC 61326-1
Electrostatic immunity
-
In accordance with IEC 61000-4-2
Electromagnetic irradiation immunity
-
In accordance with IEC 61000-4-3
Power supply
-
Built-in, NiMH battery
-
Autonomy: 1000 tests of 5 seconds with an interval of 25 seconds according IEC 61557-2. During the measurement, a test resistance is used with the value UN x (1000 Ω / V)
Battery charger
-
Built-in, with external power supply of 12 V - 2 A
Operation temperature
-
14 °F to 122 °F (-10 °C to 50 °C)
Storage temperature
-
14 °F to 158 °F (-10 °C to 70 °C)
Humidity
-
95 % RH (without condensation)
Equipment weight
-
Approx. 1.1 lb (0.5 kg)
Dimensions
-
4.01" x 7.68" x 1.81" (102 x 195 x 46 mm)
Features
-
Insulation test up to 200 GΩ
-
Test voltages: 250 V - 500 V - 1000 V
-
Short circuit current: 1.5 ± 0.3 mA
-
Guard terminal
-
Auto-range
-
Programmable timer
-
Pass-fail test
-
Low resistance and continuity measurement
-
AC/DC voltmeter up to 600 V True RMS
-
Rechargeable NiMH battery
Included accessories
-
2 Measuring test leads.
-
1 GUARD test lead.
-
1 Power cord.
-
1 Carrying bag.
-
1 Operating instructions.