
IRT.10A

Introduction to the IRT.10A:
-
Portable 10kV Insulation Resistance Tester
-
High-voltage insulation resistance tester, with 6 range: 250V, 500V, 1000V, 2500V, 5000V, 10kV test up to 20 TΩ
-
IEC 61010-1 CAT.IV 600V
-
IEC 61326-1EMC specification: test, control and electrical equipment for testing
-
IEC60529 IP65 (Outer closed state)

The IRT.10A
Technical Specifications
AC power
-
220V±10%, 50/60 Hz, 20 VA
Battery
-
16.8V Lithium-ion rechargeable battery
Battery life
-
10kV @ 100M, 6 hours
Size (L × W × H)
-
32cm × 28cm × 13cm
Weight
-
3.8kg
Test voltage accuracy
-
The nominal value 100% to 110%
Voltage measurement accuracy
-
5% + 3V
Ramp test
-
The output voltage starts at 10% of the preset voltage and increases in steps of 10% until the preset voltage is reached
Filtered resistance test mode
-
10s, 20s, 30s, 40s (4 selections)
Current measure precision
-
5% + 0.2nA
Short-circuit current
-
7mA
Capacitance test range
-
0 – 99.99μF
Capacitance testing accuracy
-
10% + 10nF
Insulation resistance testing range and accuracy
-
0.01mΩ
Test results
-
Store & download via USB
Internal memory
-
Storage up to 1000 groups
Features
-
Real time display of voltage/current value curve
-
Strictly in accordance with the safety standards for design
-
Automatic display polarization index (PI), induced electric absorption test values than (DAR), and can test the leakage current and capacitance
-
Interference rejection .When the interference current reaches 2 mA, accuracy is ensured
-
2 methods for power: use of lithium-ion batteries, battery life for up to 4 hours of testing
-
Insulation resistance simulation column
-
Digital filtering functions, external influence deviation display value causing mitigation point using filter function
-
Fuse Protection included
-
Timing test from 1-99999s
-
Automatic Discharge