SnapTRACK Locating System
Description:
Simple, accurate and affordable, the SnapTRACK Locating System will meet the demands of any locate task. This locator is designed for the locating professional, but it is simple enough to be used by anyone needing to locate.
Engineered with RYCOM’s signature Pathfinder SAF TechnologyTM, the SnapTRACK Locating System is adaptable. Frequencies and operational modes may be added or deleted on demand to suit the user’s locating needs.
Our innovative PathLink™ technology* creates a remote link between the transmitter and receiver. Users can control the transmitter’s output power and frequency right from the hand-held receiver, eliminating the back and forth walking between devices. (*optional)
A large, high-contrast LCD offers clearly visible signal response in any lighting. Automatic depth, automatic current, and proximal directional arrows are readable in the brightest sunshine or backlit for viewing in dimmer conditions.
Whether the locate is measured in feet or miles, 3 watts of power and automatic impedance matching from 5 ohms to 25,000 ohms, ensures adequate signal. The SnapTRACK Locating System is a must have for anyone needing a simple and accurate locator.
Key Features:
• Three button keypad simplifies the user interface.
• 8 Locating Modes: the multi-channel processor allows
for simultaneous field detection from a multiple antenna
array ensuring accuracy
• Customizable frequencies and operational modes
• Automatic Impedance Matching Technology: maximizes
your transmission range while minimizing power
consumption
• PathLinkTM Technology: remotely controls your
transmitter from the receiver to more than 400 yards
• High-Contrast LCD Interface with Backlight: guides the
operator to the target location by providing all relevant
data including continuous depth, current measurement,
signal strength, and directional arrows.
• Constant Depth & Current Measurement: real time
updates on line depth and signal condition
• 4-year warranty: registration extends warranty to 4
years.
• Made in the USA since 1946: Engineered in our Raytown,
MO headquarters for more than 70 years.
SnapTRACK Kit:
SnapTRACK RECEIVER
Precision locating receiver offering multiple active & passive frequencies, multiple locate modes, constant depth readout and current measurement. Standard package equipped with c-cell batteries.
SnapTRACK TRANSMITTER
3-watt transmitter capable of direct connection, transmitter induction and coupler induction. Standard with c-cell batteries.
Direct Connection Cord
Direct connection cords with 15 foot reach
Ground Rod
Ground rod for near end independent ground
Protective Carrying Case
A heavily padded protective case for equipment during
transport and use.
Manual
Operations manual
Batteries
Batteries supplied for both the transmitter and receiver.
SnapTRACK Optional Accessories:
INDUCTIVE COUPLER 4” I.D.
4” I.D. inductive coupler used to apply signal on live
cables when direct connection is not possible. Operational
frequency range 8kHz to 82kHz.
INDUCTIVE FLEXI-COUPLER 7" I.D.
Flexible coupler with 7” I.D. applies signal on cables when
direct connection is not possible. Dual frequency (82kHz &
815Hz)
STAFF A-FRAME
Stand alone a-frame works independently from the
receiver. This directional ground fault detector pinpoints
core-to-ground faults and sheath-to-ground faults.
GROUND CONNECTION EXTENSION KIT
Two 25ft cords and 2 ground rods for reaching desired
grounding location
SONDE [AVAILABLE IN 512HZ, 640HZ, 815HZ, 8KHZ & 33KHZ]
Self contained signal transmitter with 25 foot range can be
used in non-pressurized conduits and pipes to track path
and pinpoint blockages.