
Pathfinder PLS Locating System


Key Features:
• FrequencyFlex™: offers 1000+ programmable
frequencies crafted to individual locating requirements.
FrequencyFlex™ allows push-button field customization
at the job site.
• 8 Locating Modes: the multi-channel processor allows for
simultaneous field detection from a multiple antenna array
ensuring accuracy
• PathTraq™ Mobile Application: downloaded to your
phone, Rycom’s PathTraq™ is a GPS & Data Logger
application to provide real-time coordinate logging of field
locations
• Automatic Impedance Matching Technology: maximizes
your transmission range while minimizing power
consumption
• PathLinkTM receiver to more than 400 yards the target
location by providing all relevant data including
continuous depth, current measurement, signal strength,
and directional arrows.
• Constant Depth & Current Measurement: real time
updates on line depth and signal condition
• 84 wH Lithium-Ion Batteries: lighter weight design and
longer operating life
• 4-year warranty: registration extends warranty to 4
years.
• Made in the USA since 1946: Engineered in our Raytown,
MO headquarters for more than 70 years.
Pathfinder PLS Kit:
Description:
Built with Pathfinder SAF Technology™ at its core, the Pathfinder Precision Locating System from Rycom Instruments, Inc., is ideal for congested locates in crowded easements, long runs of pipe and cable, as well as basic service drops. This simple, accurate and affordable locator is designed for those committed to protecting buried infrastructure.
Engineered with our signature FrequencyFlex™, the Pathfinder Precision Locating System allows users to adapt the available frequencies to their specific needs. Frequencies can be added or deleted on demand to suit the user’s locating needs.
Our innovative PathLink™ technology* creates a remote link between the transmitter and receiver. Users can now control the transmitter’s output power and frequency from right from the hand-held receiver,
eliminating the back and forth walking between devices. (*optional)
A large, high-contrast LCD offers clearly visible signal response in any lighting. Automatic depth, automatic current, and proximal directional arrows are readable in the brightest sunshine or backlit for viewing in
dimmer conditions.
Whether the locate is measured in feet or miles, 10 watts of power and automatic impedance matching from 5 ohm to 25,000 ohms, ensures adequate signal application. The Pathfinder Precision Locating System is a must have for any damage prevention specialist.

PATHFINDER RECEIVER
Precision locating receiver offering multiple active & passive
frequencies, multiple locate modes, constant depth readout & current measurement. Standard package equipped with lithium ion rechargeable batteries & interchangeable c-cell tray.
PATHFINDER TRANSMITTER
10-watt transmitter capable of direct connection, transmitter
induction and coupler induction. Standard with lithium ion
rechargeable batteries and interchangeable d-cell tray.
Direct Connection Cord
Direct connection cords with 15 foot reach
Ground Rod
Ground rod for near end independent ground
Protective Carrying Case
A heavily padded protective case for equipment during
transport and use.
Manual
Operations manual
Batteries
Six C-cell batteries and Twelve D-cell batteries included for
immediate use
AC & DC BATTERY CHARGERS
Battery chargers for use in ac wall outlet as well as a dc charger for use in a cars 12 volt auxiliary
Pathfinder PLS Optional Accessories:

INDUCTIVE COUPLER 4” I.D.
4” I.D. inductive coupler used to apply signal on live
cables when direct connection is not possible. Operational
frequency range 8kHz to 82kHz.
INDUCTIVE FLEXI-COUPLER 7" I.D.
Flexible coupler with 7” I.D. applies signal on cables when
direct connection is not possible. Dual frequency (82kHz &
815Hz)
CABLE & PAIR IDENTIFIER
Used to identify the target cable at the open far end. Used to
ensure correct tagging or providing an independent far end
ground.
STAFF A-FRAME
Stand alone a-frame works independently from the
receiver. This directional ground fault detector pinpoints
core-to-ground faults and sheath-to-ground faults.
GROUND CONNECTION EXTENSION KIT
Two 25ft cords and 2 ground rods for reaching desired
grounding location
SONDE [AVAILABLE IN 512HZ, 640HZ, 815HZ, 8KHZ & 33KHZ]
Self contained signal transmitter with 25 foot range can be
used in non-pressurized conduits and pipes to track path
and pinpoint blockages.
EXTERNAL PROBE
The external antenna aids in cable identification, underwater
locating and signal reception when the receiver can not fit.
EXPLORING COIL
The exploring coil for locating wiring within walls and cables
within cable bundles
HEADPHONE
Mono jack headphone aids when working with background noise