P-1 / 2 / 3 VOLTAGE AND CONTINUITY TESTERS
Key Features:
-
The P series indicators allow for voltage measurement even with discharged batteries.
-
P-3 is the only indicator allowing for phase identification.
Specifications:
Electric security:
- type of insulation double, according to EN 61010-1
- measurement category CAT III 1000V (IV 600V) acc. to EN 61010-1
- protection class acc. to EN 60529 IP65
Other technical data:
- meter’s power supply....................................... alkaline batteries LR03 (AAA) (2 pcs.)
- frequency range for a single-pole phase indicator...................................... 50...400Hz
- accuracy of voltage indications.................................. in accordance with EN 61243-3
Nominal operating conditions:
- operation temperature............................................................................... -10...+55°C
- voltage frequency range for the diode bar.................................................. 15...400Hz
- maximum measurement current................................................. I <0,2A/I (5s)<3,5mA
.*For full Technical Specifications, please refer to PDF Data Sheet
Standard Accessories:
Indication and measurement of direct and alternating voltages:
- indication on the LED bargraph: 12, 24, 50, 120, 230, 400, 690 V
(also operates without batteries),
- display of the measurement result on the LCD screen,
- determining voltage: alternating or polarity of direct voltage.
Measurement of resistance and circuit continuity:
- display of the measurement result on the LCD screen,
- signalling for resistance < 400 kΩ.
Phase rotation indicator:
- indication of phase sequence for voltage > 100 V.
Single-pole phase determination:
- indication with the use of the touch electrode,
- optical and acoustic signalling for voltage > 50 V.
Residual current device test:
- testing RCDs of I ≤ 100 mA. Δn
Phase identification and phasing (P-3 only):
- determining phase at a given point in reference to some other
point,
- capability of determining phase at a given point with the use of an
additional transmitter - no time limit related to the synchronisation
of power system.
- batteries LR03 (AAA) (2 pcs.)
- operating manual
transmitter LKN-710P
(P-3 only)
Optional Accessories:
- transmitter LKN-710P (P-3 only)
- carrying case S2