MRP-201 (RCD) Meter
Key Features:
-
general, short delay I =10, 30, 100, 300 and 500 mA, Δn
- simultaneous measurement of triggering current I and disconnection
time t , for currents 0,5I ,1I , 2I , 5I , A A Δn Δn Δn Δn
- without triggering,
- AUTO RCD test function.
-
AC voltage and frequency measurement.
-
PE lead connection check using a touch electrode.
-
Built-in memory for up to 990 cels of measurement results
-
Wireless radio communication interface.
-
Testing RCD breakers of AC, A and B types.
-
testing of and selective RCDs for the rated current values
-
ability to measure touch voltage U and earth resistance R B E
.
-
Professional software for reading data and creating reports.
Specifications:
Electrical safety
- type of insulation: double, according to EN 61010-1and IEC 61557, EMC
- measurement category: CAT IV 300V (III 600V) acc. to EN 61010-1
- protection class IP67
Other technical data:
- power supply......................................................... alkaline batteries LR6 (AA) (4 pcs.)
Rated operational conditions:
- operating temperature................................................................................ -10...+50°C
- storing temp................................................................................................. -20...70°C
- humidity.......................................................................................................... 20...80%
.*For full Technical Specifications, please refer to PDF Data Sheet
Standard Accessories:
Optional Accessories for the MRP-201:
- Adapter UNI-SCHUKO (WS-05)
- Receiver - interface for radio transmission OR-1 (USB)
- operation manual
- calibration certificate
- Test lead with banana plug; 1,2m; yellow
- Test lead with banana plug; 1,2m; red
- Test lead with banana plug; 1,2m; blue
- "Crocodile" clip K02; yellow
- Pin probe with banana connector; red
- Pin probe with banana connector; blue
- Carrying case M6
- hanging straps
- handle to suspend the meter
- R6 batteries - 4pcs.
- Test lead with banana plug 5m; red
- Test lead with banana plug 10m; red
- Test lead with banana plug 20m; red
- Probe with START button with UNI-SCHUKO (WS-01)
- Software for creation of documentation from
electrical measurements “SONEL Reports"
