MPI-505 Multifunction Electrical Installation Meter
Key Features:
-
MPI-505 meter has improved immunity to unfavourable operating conditions.
-
Quick verification of correctness of the PE conductor connection with the use of a touch electrode.
-
Phase sequence checking.
-
Memory of 990 measurements (57500 individual results), data transfer to a PC over the USB or wireless interface.
-
Battery or rechargeable battery power supply.
-
Real time clock (RTC) - measurement time saved in memory.
Low-voltage measurement of protective connection
and equipotential bonding resistance:
- measurement of the protective conductor continuity with current 200 mA
in both directions (in accordance with the EN 61557-4 standard),
- low-current measurement of resistance with acoustic and light signalling,
- automatic calibration of test leads - capability of using test leads of any
length.
Specifications:
Measurement of short-circuit loop impedance:
- impedance measurement in power systems of rated voltages:
115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V and
frequencies of 45...65 Hz,
- measurement of short-circuit loop impedance with current 15 mA
with the resolution of 0.01Ω, without tripping residual current
devices.
Electrical safety
- type of insulation: double, according to EN 61010-1and IEC 61557, EMC
- measurement category: IV 300 V acc. to EN 61010-1
- protection class acc. to EN 60529: IP54
.*For full Technical Specifications, please refer to PDF Data Sheet
Standard Accessories:
Examination of AC, A and B type residual current devices:
- measurement of general use and selective RCDs of rated residual
current 10, 30, 100, 300, 500 and 1000 mA,
- measurement of the I tripping current, A
- measurement of the t tripping time for 1/2I , I , 2I , 5I , A Δn Δn
Δn Δn
- measurement of earthing continuity and touch voltage without
tripping RCDs,
- a function of automatic measurement of residual current device
parameters.
Insulation resistance measurement:
- four test voltages for insulation resistance measurement: 100 V,
250 V, 500 and 1000 V.
Optional Accessories for the MPI-525:
- Adapter with START button with UNI-Schuko (WS-01)
- Test lead with banana plug; 1,2m; red
- Test lead with banana plug; 1,2m; yellow
- Test lead with banana plug; 1,2m; blue
- USB cable
- Pin probe with banana connector; red
- Pin probe with banana connector; yellow
- Pin probe with banana connector; blue
- "Crocodile" clip K02; yellow
- "Crocodile" clip K02; red
- Carrying case L4
- Hanging straps
- Calibration certificate, Sonel Reader software, batteries
- 5 m red test lead terminated with a banana plug
- 10 m red test lead terminated with a banana plug
- 20 m red test lead terminated with a banana plug
- WS-05 adapter with a UNI-Schuko plug
- AGT-16C adapter for 4-contact 3-phase sockets
- AGT-16P adapter for 5-contact 3-phase sockets
- AGT-16T adapter for industrial sockets
- AGT-32C adapter for 4-contact 3-phase sockets
- AGT-32P adapter for 5-contact 3-phase sockets
- AGT-32T adapter for industrial sockets
- AGT-63P adapter for 5-contact 3-phase sockets
- TWR-1J adapter for testing RCD breakers
- “SONEL Pomiary Elektryczne” program for creating reports
- “SONEL Schematic” prog. for creating drafts, electr. inst. schem.
- “SONEL PE Kalkulacje” program for creating measurement calc.
- official calibration certificate