top of page
MIC-2510  Insulation Resistance Meter
MIC-2510 insulation resistance meter
Insulation resistance measurement:
Key Features:

  • Measurement of leakage current during insulation resistance testing.

​

  • Measurement of capacity during the measurement of R . ISO

​

  • Continuous measurement of surrounding temperature with the capability of recording results in memory.

​

  • DC and AC voltage measurement in the range of 0…600 V.

​

  • 990 cells of memory (11880 records) with the capability of wireless data transmission to a PC (with the USB-OR-1

​

  • adapter) or through a USB cable.

​

  • Power supply from battery packs.

​

  • The instruments meet the requirements of the PN-EN 61557 standard.

Specifications:

Electrical Safety:

type of insulation                                        double, in acc. with EN 61010-1 and IEC 61557

measurement category                                      in acc. to IV 600 V (III 1000 V) EN 61010-1

case protection rating in acc. with EN 60529                                                                 Ip54

​

Other technical specifications:

power supply of the meter .........................................  SONEL L-1 NiMH 9.6V battery pack

weight of the meter ......................................................................................... approx.1.3kg

dimensions............................................................................................. 260 x 190 x 60 mm

display ............................................................................................... LCD segment display

measurement results ...................................................... memory 990 cells, 11880 records

transmission of measurement results .......................................... USB o Wireless interface

humidity .............................................................................................................  20%...90%

​

*For full Technical Specifications, please refer to PDF Data Sheet

- selectable measurement voltage 100, 250, 500, 1000 V or any in

  the range of 50…2500 V at 10 V resolution,

- continuous indication of measured insulation resistance or leakage

  current,

- automatic discharge of measured object capacitive voltage after

  the completion of insulation resistance measurement,

- acoustic signaling of 5 seconds intervals to facilitate capturing time

  characteristics,

- metered T , T and T test times for measuring one or two absorption

  coefficients from the range of 1…600 s, 1 2 3

- capability of automatic measurement of multi-wire cables with the

  additional AutoISO-2500 adapter,

- indication of actual test voltage during measurement,

- protection against measuring live objects.

​

Continuity measurement of protective connections and equipotential bonding in accordance with PN-EN 61557-4

with current > 200 mA.

​

Circuit continuity and resistance measurement at low voltage.

- circuit resistance measurement ( < 999 Ω) with current < 15 mA,

- quick acoustic signaling for a circuit of resistance lower than 10 Ω

- compensation (automatic zero) of test lead resistance.

Standard Accessories:

  • test lead banana plug; 1,8m; 5kV; red

  • test lead banana plug; 1,8m; 5kV; blue

  • test lead banana plug; 1,8m; 5kV; black

  • USB cable

  • "crocodile" clip K02 5kV; black

  • "crocodile" clip K05 5kV; red

  • "crocodile" clip K05 5kV; blue

  • pin probe 5kV with banana connector; red

  • pin probe 5kV with banana connector; black

  • USB cable

  • carrying case

  • power supply adaptor Z7

  • meter harness

  • DVD with software, including “SONEL Reader” (reading data from memory)

  • calibration certificate

  • warranty card

bottom of page