top of page
MultiSafe DSP 5 Voltage Testing Series
main+dsp5_edited_edited_edited_edited_ed
Features & Functions

Voltage Tester

  • Precise display of the voltage: 0.3 V to 1200 V AC / 0.01 to 1500 V DC

  • Extended test range for low and battery voltages: 0.01 to 19.99 V DC

  • Extremely voltage-resistant – CAT IV 1000 V – VDE certified

  • Large two-color illuminated display (red/white) for clear warning of hazardous voltages

  • Clear LED indication for hazardous voltage

  • Additional load for interference voltages and RCD-tripping

  • Hold the measured value with the HOLD button

Continuity Tester

  • Quick continuity test with sound

  • Accurate resistance measurement in the range 0.01 kΩ to 1000 kΩ

  • Green LED for continuity

Phase and Phase Sequence Tester

  • Phase tester with display “POL” and red LED

  • Phase sequence tester with LCD and LED display right/left

  • Controller-monitored testing with error detection to avoid false statements

  • Additional phase sequence tester without earth for IT networks

Further Functions

  • Measuring point lighting

  • Slim test electrodes for narrow clamping strips

  • One-handed operation when testing sockets

  • Easy handling

  • Insulation fault detection through two-color line insulation

  • Extremely stable housing, even in cold conditions

  • IP 65 – waterproof

  • With belt clip on the back

Meet The MultiSafe DSP 5 Series
DSP 5 with additional load

  • nominal voltage range:
    0,80 − 1200 V AC / 0,00 − 1500 V DC

  • display range with activated load up to 1200 V DC

  • continuity tester with measurement 0,01 − 1000 kOhm

  • overvoltage category: CAT IV 1000 V

  • measuring point lighting

  • phase sequence test without earth for IT networks

  • additional load for interference voltages and RCD−tripping

main+dsp5_edited.png
DSP 5B without additional load
DSP5B_edited_edited.png

  • nominal voltage range:
    0,80 − 1200 V AC / 0,00 − 1500 V DC

  • display range with activated load up to 0,01 − 1000 kOhm

  • overvoltage category: CAT IV 1000 V

  • measuring point lighting

  • phase sequence test without earth for IT−networks

DSP 5ST with additional load and slide tip

  • nominal voltage range:
    0,80 − 1200 V AC / 0,00 − 1500 V DC

  • display range with activated load up to 1200 V DC

  • continuity tester with measurement 0,01 − 1000 kOhm

  • overvoltage category: CAT IV 1000 V

  • measuring point lighting

  • phase sequence test without earth for IT networks

  • additional load for interference voltages and RCD−tripping

  • slide Tip with adjustable electrode length 4 or 15 mm

DSP5ST_edited.png
Optional Accessories:
accessories_edited_edited_edited_edited_
Technical Specifications 

Model

  • DSP 5B

  • DSP 5

  • DSP 5ST

​

Nominal Voltage

  • 12 - 1000 V AC

  • 12 - 1500 V DC

  • Load max. up to 1200 V (DSP 5 only)

​

Display Range

  • 0.15 - 1200 V AC

  • 0.03 - 1500 V DC

​

Resistance Measurement

  • 0.01 - 1000 kΩ

​

Continuity Tester with Sound

  • Yes

​

Frequency Range

  • DC / 15 - 10,000 Hz

​

Single-Pole Phase Test (Phase)

  • Yes

​

Phase Sequence Tester

  • Yes

​

Phase Sequence Tester for IT Network Without Ground Reference

  • Yes

​

Power Supply

  • 2 x 1.5 V AA

​

Overvoltage Category

  • CAT IV 1000 V (according to IEC 60664-1, VDE 0110)

​

Degree of Protection

  • IP 65

​

VDE GS Approval According to IEC 61243-3

  • Yes

​

Measuring Point Lighting

  • Yes

​

Switchable Load and 30 mA RCD-Tripping

  • DSP 5B: No

  • DSP 5: Yes

  • DSP 5ST: Yes

​

Adjustable Electrode Length 4 or 15 mm

  • DSP 5B: No

  • DSP 5: No

  • DSP 5ST: Yes

​

Art.-No.

  • DSP 5B: 84502

  • DSP 5: 84501

​

  • DSP 5ST: 84503

Product Dimensions and Weight

  • Handgrip and display unit: 275 x 89 x 35 mm

  • Display unit: 275 x 60 x 35 mm

  • Weight: 270 g

​

Product Packaged Dimensions and Weight

  • 315 x 105 x 60 mm

  • 425 g

bottom of page