top of page
MD5060B
pic-MD5060B-insulation-tester_600_edited
Introduction to the  MD5060B:
  • The TENTECH MD5060B is a smart, 5 kV insulation tester and analyzer. Besides the conventional measurement of insulation resistances up to 5 TΩ, its advanced features allow to automatically measure both the Polarization Index and Dielectric Absorption Index, thus significantly simplifying testing of transformers. This insulation tester is a portable, rechargeable battery-powered equipment. Test voltage may be chosen from 250 V to 5 kV in 100 V increments. Due to its measurement principle (actual voltage and current readings) the accuracy of resistance measurement is not affected by any test voltage error. Nevertheless, the high-voltage generator is electronically stabilized with a better than 3% accuracy in open-circuit condition and for any normal operation battery condition.
     

  • The built-in chronometer automatically counts the elapsed time since the start of measurement. Measured values are transmitted through the USB interface and are printed in the built-in printer as a registration of the performed test. Furthermore, the measured values are stored in a non-volatile internal memory. Up to 4000 measured values may be stored, to be transferred afterward to a computer running the TLogger program. This advanced software allows a further analysis of the test results, including a graphical representation and automatic report generation.
     

  • Some other advanced features are useful to run the most sophisticated insulation analysis. Step voltage test, 200 mA continuity range, low resistance measurement, configurable pass-fail and timed measurements are automatically performed. The measurement parameters are stored in the non-volatile memory for an easy configuration.
     

  • In order to guarantee the operator safety, the cabinet is made of a high breakdown strength plastic. High security output terminals are placed in the furthest and most protected area of the equipment. A light indicator shows high-voltage presence and is switched-off when the capacitances (both internal and external) are discharged up to reaching a safe value. This instrument provides excellent performance both in laboratory and field works, under hard environment conditions.

The  MD5060B
Technical Specifications

Test voltages

  • 500, 1000, 2500, 5000 V directly, one button selectable

  • 250 V to 5 kV in 100 V or 500 V increments

  • DC, negative

Test voltages accuracy

  • ± 3% of nominal test voltages on R ≥ 10 GΩ

Maximum resistance reading

  • 5 TΩ @ 5 kV

Megohmmeter basic accuracy

  • ± 5% of reading from 1 MΩ up to 1 TΩ

  • ± 20% of reading from 1 TΩ up to 5 TΩ

Short circuit current

  • 1.5 ± 0.5 mA

Low resistance measurement and Continuity tester

  • Range: 0.1 Ω to 20 kΩ

  • Accuracy: 3% of reading ± 2 digits

  • Test current: up to 200 mA

  • Continuity sound indicator: activates at R < 5 Ω ± 0.5 Ω

Measurement modes

  • Manual, Timed, "Pass / Fail", Step voltage test, Polarization index, Dielectric absorption index, Low resistance and Continuity tester

Filter function

  • Minimizes interference in resistance measurements

Chronometer

  • Shows elapsed time in mm:ss format. Count starts automatically for each measurement

Display

  • Alphanumerical LCD display, 4 lines / 20 characters (Big Number)

Printer

  • Built-in thermal printer​​

Internal memory

  • For up to 4000 measured values

Communication

  • USB

Software desktop (PC/Notebook)

  • TLogger software: to download the data stored in the equipment's memory, analyze them and generate test reports

Safety class

  • IEC 61010-1

Overvoltage protection

  • CAT III - 600 V

EMC

  • IEC 61326-1

Electromagnetic irradiation immunity

  • IEC 61000-4-3

Electrostatic immunity

  • IEC 61000-4-2

Protection grade

  • IP65 (with closed lid)

Operating temperature range

  • 10 °F to 120 °F (-12 °C to 49 °C)

Storage temperature range

  • -10 °F to 160 °F (-23 °C to 71 °C)

Humidity range

  • 98% RH (non condensing)

Rechargeable battery

  • LFP (LiFePO4), 12 V - 3000 mAh

Battery charger

  • AC adapter, input 100 - 255 V 50/60 Hz, output 12 V - 1 A

Equipment weight

  • Approx. 8 lbs (3.6 kg)

Dimensions

  • 11" x 10" x 5" (approx. 280 x 254 x 127 mm)

Features
  • Insulation resistances up to 5 TΩ

  • Automated tests: absorption index, polarization index

  • Continuity test

  • Low resistance measurement

  • Programmable pass-fail

  • Programmable timer

  • Real time clock

  • Guard terminal

  • Built-in printer

  • USB interface

  • Internal memory for 4,000 measured values

  • Software for data management

Included accessories
  • 3 x 12' (3.7 m) measurement cables

  • 2 x 5' (1.5 m) cables (for low resistance/continuity measurement)

  • AC adapter

  • USB cable

  • Instruction manual in English

  • TLogger software (download)

  • Carrying bag

Desktop software
  • Equipment's internal memory can be accessed by a desktop software that allows to download all memory data. It also can be used to make analysis of the test results and automatic report generation. (Software included with purchase)

pic_notebook.png

Email:  info@itesouthafrica.com 

Address:  Unit B1,Sanlam Industrial Park,

 

      Masjien Street,Strydom Park,

Randburg, Gauteng

 

South Africa

Phone:  +27 (0)872658722

© 2021 ITESA - Industrial Test Equipment South Africa  |  Terms and Conditions  |  Privacy Policy

bottom of page