ID.750LTD Cable Identification System
Introduction to the ID.750LTD:
-
ECI Set:
Identifying a certain cable correctly from a bunch of cables is a common tech question. Cable identifying will avoid severe damage resulting from cutting through the incorrect cable. The kit consists of a TX transmitter which has a pulse peak of up to 180A & RX Receiver with a 150mm flex clamp for decoupling the identification signal. ECI is applicable for identifying low voltage live cables for 220V/380V systems and the identification of low voltage section.
Perfect for a positive identification every time for maximum safety.
Operation time of over 60 hours of continuous use.
-
HCI Set:
The HCI TX has an internally powered generator which is designed for the selection of de-energized cables. The HCI TX generates active impulses up to 300 A peak. The pulse feeds via direct connection or with. The operating time of up to 6 hours of continuous use.
Standard Accessories
• HCI TX Transmitter (De-Energised Cable ID) – 1 unit
• HCI Test Lead Set incl. Clamps – 1 unit
• HCI RX Receiver (Batteries included) – 1 unit
• 150mm Flexible Clamp (Optional 230mm Clamp) – 1 unit
• ECI TX Transmitter (Live Cable ID) – 1 unit
• ECI Test Lead Set incl. Clamps – 1 unit
• TFP CI Twisted Field Probe – 1 unit
• Mains Cable EU (For ECI TX) – 1 unit
• Carry Case – 1 unit
• Instruction Manual – 1 unit
• Certificate of Conformance – 1 unit
Technical Data HCI set
Transmitter
• Display: LED signal strength indicator (red/yellow/green)
• LED battery status indicator (red/yellow/green)
• One-button operation ON/OFF
• Pulse Voltage: 100V, DC
• Pulse Current: 0-300A
• Pulse Frequency: 30 times/min
• Pulse Width: 60ms
• Power Supply: AC 100-240V, 50 Hz or built-in 12V lithium battery
• On-site Use Time: Over 6 hours, continuous use
• Charge Time: 6 hours
• Weight: 1.5kg (no battery); 3kg (with battery)
• Size: 325 x 248 x 125 (mm)
Receiver (LED optional)
• Display: LCD screen indicates the target cable (target cable)
• LCD screen indicates non-target cable (no signal)
• Clamp: Flexible clamp, φ19mm
• Gain: 10 gears (-3dB to +24 dB)
• Power Supply: 4 x AAA
• On-site Use Time: ＞50 hours
• Weight: 400g (with clamp and battery)
• Size: 165 x 80 x 30 (mm)
Technical Data ECI set
Transmitter (ECI-TX)
• Working Voltage: AC 220V, 50Hz
• Periodic Impulse Current: 180A±10A
• Impulse Frequency: 30 times/min
• Display Mode: RED/GREEN LED
• Power Supply: Lithium battery
• Weight: 500g
• Size: 158 x 90 x 60 (mm)
Receiver (ECI-RX)
• Display: LCD screen indicates the target cable (target cable)
• LCD screen indicates non-target cable (no signal)
• Keys Press Mode: Touch button
• Gain: 10 gears (-3dB to +24 dB)
• Power Supply: 2 x 1.5V AA
• On-site Use Time: ＞60 hours
• Clamp: Flexible clamp
• Weight: 400g (with clamp and battery)
• Size: 118 x 78 x 24 (mm)