top of page
DST.321 Transformer oil Distillation Tester
About the DST.321:

  • This instrument is a high-tech product that integrates mechanics, optics, and electronics.

​

  • It uses an original German temperature sensor to automatically control the distillation rate, recovery volume, and automatically detect the initial boiling point, dry point, and atmospheric pressure.

​

  • The results are automatically calculated with automatic fire extinguishing, graduated cylinder bath temperature control (range: 0–60℃), cold bath temperature control (range: 0–60℃), and automatic atmospheric pressure correction.

​

  • The entire distillation experiment process can be automatically completed.

​

  • This instrument features a reasonable structure, stable performance, and simple operation, making it an ideal analytical and testing tool.

Specifications:

Temperature Measurement Range

  • Room temperature ~ 400℃

  • Resolution: 0.1℃

​

Water Bath Constant Temperature Range

  • 0~60℃ (Imported compressor for refrigeration)

​

Peripheral Temperature of Internal Recycling Measuring Cylinder

  • 5～50℃

​

Distillation Rate

  • 4～5ml/min

​

Volume Detection Range

  • 0～150ml

  • Resolution: 0.1ml

​

Temperature Measuring Element

  • PT100 (Original temperature measuring sensor from German JUMO)​

Display

  • 1024×600 resolution, true colour large screen

​

Printing

  • Embedded micro printer

​

Heating Furnace Power

  • 1kW

​

Refrigeration Method

  • Compressor refrigeration

​

Ambient Temperature

  • 15～25℃

​

Operation Method

  • Start by program, simple operation

​

System Management

  • Supports laboratory LIMS system

Key Features:

Intelligent heating management system ensures the distillation rate meets the requirements of the experimental method.

​

Recording points can be set by the user:

  • Users can set and record the recovery volume corresponding to the temperature.

  • Users can set and record the temperature corresponding to the recovery volume.

  • Automatically records recording points specified by national standards.

​

Four ways to end the experiment:

  • Final Point End: Ends the experiment when the final distillation point is detected.

  • Dry Point End: Ends the experiment when the dry point is detected.

  • Temperature End: Ends the experiment based on the user-set temperature value and prints the output.

  • Volume End: Ends the experiment based on the user-set volume value and prints the data.

bottom of page