Key Features:

• SafeTest Manufacturing/Luminaire (STM/L) can be used as a simple manual electrical safety tester or with varying degrees of automatic test sequencing.

• The electrical safety tester performs earth bond testing, insulation resistance testing, flash testing / hipot testing, leakage testing, short-to-line and run/load tests. It is easy to operate with a full QWERTY keypad and/or barcode scanner, and includes full-on screen user instructions.

​

• The STM/L meets the needs of manufacturers who require a range of fundamental safety tests to be carried out on a variety of electrical and electronic products to CE and international standards

• All tests are individually selectable and STM/L’s internal memory has the capacity to store the results of 6,000 tests.

• An optional safety label printer enables the automatic production of test tags, labels and test reports. Clever use of the optional barcode scanner (for product identification and tester configuration) means this product can be integrated easily into a typical ISO quality control system.

Technical Specifications 

Flash/Hipot Test (Class I)

• Test Voltage Class I1.5kV AC

• Display Range0.1 – 10.00mA

• Resolution0.01mA

• Accuracy+/- 5% +/- 2 digits

• Pass Levels Selectable up to 10mA

Earth/Ground Bond Test

• Test Voltage 6VAC (open circuit)

• Test Currents 25A, 10A, 4A, 100mA AC into short circuit

• Range 0.04 - 20Ω

• Resolution 0.01Ω

• Accuracy +/- 5% +/- 2 digits

• Pass Levels User selectable

Earth Leakage (Load Leakage)

• Voltage Mains Supply

• Range 0.1 – 20mA

• Resolution 0.01 mA

• Accuracy +/- 10% +/- 2 digits (1.00 – 20mA)

• Pass Levels Selectable up to 10 mA

Power/Run/Load Test

• Measured Load 0 – 4.2kVA

• Resolution 0.01 kVA

• Accuracy +/- 10% of reading, +/- 2 digits

External Connections

• Serial Port

• Parallel Port

• Guard Switch

• Beacon

Flash/Hipot Test (Class II)

• Test Voltage Class II3.0kV AC

• Range 0.1 – 10.00mA

• Resolution 0.01mA

• Accuracy +/- 5% +/- 2 digits

• Pass Levels Selectable up to 10mA

DC Insulation Test

• Test Voltages 250V, 500VDC

• Range 100kΩ - 50MΩ

• Accuracy +/- 5% +/- 2 digits

Substitute Leakage (Short to case test)

• Voltage 40VAC nominal at 230V/110V supply

• Range 0.1 – 20mA

• Resolution 0.01 mA

• Accuracy +/- 10% +/- 2 digits (1.00 – 20 mA)

• Pass Levels Selectable up to 15 mA

Polarity

• Test performed Live & Neutral continuity & polarity

General Specifications

• Dimensions (w x h x d) 450 x 410 x 155mm / 17.7 x 16.1 x 6.1”

• Weight 9kg / 19.8lb

• Operating Voltage Range 103V – 126V, 207V – 253V, 45Hz – 65Hz

• Operating Temperature 0 – 40°C

• EN 50191 Compliant when used with appropriate accessories