CMM-40 Industrial Multi-meter
Key Features:
Industrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.
-
Autoranging/manual range selection.
-
„DATA HOLD” function, for holding measured values.
-
„REL” function, which allows you to make measurements relative to a stored reference value.
-
„MAX/MIN” function.
-
„PEAK HOLD” function.
-
Memory for 2000 measurement results.
-
Continuity test with acoustic signalling (beeper).
-
„AUTO-OFF” function.
-
Display 4¾ digits (40000 max).
-
Double moulded, waterproof .
Specifications:
Electrical safety
- type of insulation double, EN 61010-1 and IEC 61557 compliant
- measurement category CAT III 1000V acc. to EN 61010-1:2004
- protection class acc. to EN 60529 IP67
Other technical specifications
- power supply ..............................................................................9V battery type 6LR61
- diode test................................................................................. I=0,9mA, U =2,8V DC 0
- continuity test.......................................................... I<0,35mA, sound signal for R<35Ω
- over range indication .................................................................................0L displayed
- crest factor.......................................................................... ≤ 3 at full scale up to 500V,
decreasing linearly to ≤ 1,5 at 1000V
- PEAK captures peaks.......................................................................................... >1ms
- sampling rate.................................................................................. 2 times per second
- input impedance ................................................................10MΩ (V DC), 9MΩ (V AC)
- display ..........................................40000 counts backlit LCD with bargraph, 4¾ digits
- store capacitance .................................................................................................2000
- dimensions .......................................................................................187 x 81 x 55 mm
- weight.................................................................................................................. 342 g
- fuses .....................................................mA, μA range: 0,5A/1000V ceramic fast blow
A range: 10A/1000V ceramic fast blow
- auto power OFF ................................................................................................15 min.
- accordance with following standards ...............................................EN 61010-1:2004
EN 61010-2-032
- quality standard............................................................................................. ISO 9001
Rated operational conditions:
- operating temperature................................................................................... 0...+40°C
- storage temperature ...................................................................................-20...+60°C
- operating humidity ............................................................max 80% up to 87°F (31°C)
decreasing linearly to 50% at 104°F (40°C)
- operating altitude ........................................................................................max 2000m
.*For full Technical Specifications, please refer to PDF Data Sheet
Standard Accessories:
- test leads (2 pcs.)
- battery 9V
- K type temperature probe
- carrying case
- waterproof plugs (2 pcs.)
- operating manual